Tag: Publication

Review on Laser Induced Graphene and its use for Chemical Sensing – Open Access Paper

Post author By Francesco Greco
Post date June 26, 2021

“Three-Dimensional (3D) Laser-Induced Graphene: Structure, Properties, and Application to Chemical Sensing“

Federico Maria Vivaldi, Alexander Dallinger, Andrea Bonini, Noemi Poma, Lorenzo Sembranti, Denise Biagini, Pietro Salvo, Francesco Greco*, and Fabio Di Francesco*
Publication Date: June 24, 2021
https://pubs.acs.org/doi/10.1021/acsami.1c05614

Abstract

Notwithstanding its relatively recent discovery, graphene has gone through many evolution steps and inspired a multitude of applications in many fields, from electronics to life science. The recent advancements in graphene production and patterning, and the inclusion of two-dimensional (2D) graphenic materials in three-dimensional (3D) superstructures, further extended the number of potential applications. In this Review, we focus on laser-induced graphene (LIG), an intriguing 3D porous graphenic material produced by direct laser scribing of carbonaceous precursors, and on its applications in chemical sensors and biosensors. LIG can be shaped in different 3D forms with a high surface-to-volume ratio, which is a valuable characteristic for sensors that typically rely on phenomena occurring at surfaces and interfaces. Herein, an overview of LIG, including synthesis from various precursors, structure, and characteristic properties, is first provided. The discussion focuses especially on transport and surface properties, and on how these can be controlled by tuning the laser processing. Progresses and trends in LIG-based chemical sensors are then reviewed, discussing the various transduction mechanisms and different LIG functionalization procedures for chemical sensing. A comparative evaluation of sensors performance is then provided. Finally, sensors for glucose detection are reviewed in more detail, since they represent the vast majority of LIG-based chemical sensors.

Tags Alexander Dallinger, biosensors, chemical, collaboration, Francesco Greco, Graphene, Laser, LIG, open access, Publication, Publications, review, sensor

News Publications

Paper on Printed Tattoo Organic Photodiode in ACS Applied Electronic Materials + Journal Front Cover

Post author By Francesco Greco
Post date June 14, 2021

“Temporary Tattoo Approach for a Transferable Printed Organic Photodiode“

Bernhard Burtscher, Günther Leising, Francesco Greco
Publication Date: June 10, 2021
https://doi.org/10.1021/acsaelm.1c00249

Abstract

Generation of ultrathin, transferable, and imperceptible electronic devices [e.g., organic photodiode (OPD)] for multiple applications, such as personalized health monitors and wearables, is emerging due to the continuous development of materials and manufacturing processes. For such devices, the choice of a suitable substrate is of utmost importance. A water decal transfer from a temporary tattoo paper is adopted here as a substrate for ultrathin and conformable organic components because of easy and reliable transfer of a ≈600 nm robust and transparent polymer nanofilm of ethyl cellulose. Strategies for the fabrication of a transferable OPD on a temporary tattoo are investigated. A device with an overall thickness <1 μm and its performance after transfer are demonstrated. Then, efforts are put into fabricating an OPD by inkjet printing with a water-soluble active layer consisting of polythiophene and fullerene derivatives to aid cost- and material-efficient, large-scale production possibilities. Additionally, a second semitransparent electrode made of printed aluminum-doped zinc oxide and silver nanowires is used to allow usage from both sides to enhance the application potential. Both OPD examples presented here need improvement of the device performance but permitted us to highlight the versatility and application potential of temporary tattoos for transferable components. Target surfaces for the final application after transfer include artificial (flat and smooth, e.g., glass, or even complex and rough, e.g., concrete, paper, and so forth) as well as natural ones.

Featured in Journal Front COVER of June 2021 Issue

A temporary tattoo printed organic photodiode (OPD) transferred onto a maple leaf. With an overall device thickness <1 μm, the tattoo OPD is able to achieve stable conformal adhesion on a variety of uneven target surfaces.

Tags Bernhard Burtscher, Francesco Greco, leaf, light, organic electronics, photodiode, printed electronics, Publication, Publications, sensor, tattoo, transferrable, ultrathin

Conferences & Posters News Publications

Paper on Multiresponse Soft Acutators published in ACS Applied Polymers

Post author By Alexander Dallinger
Post date March 10, 2021

“Multiresponsive Soft Actuators based on Thermoresponsive Hydrogel and embedded Laser-Induced Graphene”

Alexander Dallinger, Paul Kindlhofer, Francesco Greco and Anna Maria Coclite
Publication Date: March 9, 2021
https://doi.org/10.1021/acsapm.0c01385

Short presentation of the multiresponsive actuators

Abstract

The method of converting insulating polymers into conducting 3D porous graphene structures, so called laser-induced graphene (LIG) with a commercially available CO₂ laser engraving system in an ambient atmosphere, resulted in several applications in sensing, actuation and energy. In this paper we demonstrate a combination of LIG and a smart hydrogel (poly(N-vinylcaprolactam) – pNVCL) for multiresponsive actuation in a humid environment. Initiated chemical vapor deposition (iCVD) was used to deposit a thin layer of smart hydrogel onto a matrix of PDMS and embedded LIG tracks. An intriguing property of smart hydrogels, such as pNVCL, is that the change of an external stimulus (temperature, pH, magnetic/electric fields) induces a reversible phase transition from a swollen to a collapsed state. While the active smart hydrogel layer had a thickness of only 300 nm (compared to the 500 times thicker actuator matrix), it was possible to induce a reversible bending of over 30° in the humid environment triggered by joule heating. The properties of each material were investigated by means of scanning electron microscope (SEM), Raman spectroscopy, tensile testing and ellipsometry. The actuation performances of single-responsive versions were investigated by creating a thermoresponsive PDMS/LIG actuator and a humidityresponsive PDMS/pNVCL actuator. These results were used to tune the properties of the multiresponsive PDMS/LIG/pNVCL actuator. Furthermore, the capabilities of self-sensing were investigated. By getting a feedback from the piezoresistive change of the PMDS/LIG composite the bending angle could be tracked by measuring the change in resistance. To highlight the possibilities of the processing techniques and the combination of materials, a demonstrator in the shape of an octopus with four independently controllable arms was produced.